Traditional Fluxes for aluminium alloys
The traditional range of Hüttenes-Albertus fluxes are designed to carry out a wide range of specialised metal treatments, including oxide removal, dross separation, hydrogen gas control and improvement of metal structures via the addition or removal of trace elements. In some cases ECOFLUX products can be used as an alternative depending on the type of metal treatment required.
Drossing Fluxes
Drossing Fluxes At the surface the flux initiates a reaction in the dross which separates aluminium from the dross, thereby increasing the metal recovery from the furnace.
- Cover 131
- Cover 133
- Cover 302
- HMC 37
Refining / Cover Fluxes
Refining Fluxes Fluxes with a low melting point used for melting fine or dirty material providing a fluid, protective cover. Some can be used to remove trace elements or residues from furnace walls.
- EXF446
- Demagger B
Degassing / Regassing Fluxes
Degassing/Regassing Fluxes are designed to control the hydrogen content of the melt. Mainly used in tablet form but also available in powder or granular form.
- Diecasting Flux 17
- Ecogas 16
Modifying Fluxes
Modifying Fluxes Providing modification of the eutectic silicon phase in hypo-eutectic and eutectic alloys
- HMC15
- Injection Flux 618